- 1999+ Audi A3 (8L1)
Key programming:
- Virgin transponder
- All keys present.
- Depends on the model, some controls are programmed with machines and others are programmed manually.
Manual control programming procedure:
- Turn the ignition ON with a key.
- Exit the vehicle, close the door, insert the key into the door lock, turn to lock (clockwise)
- The system will give you thirty seconds to carry out the programming of each of the keys
- Within 5 seconds, press the “unlock” button once. to confirm the programming of the remote control in the position. The indicators flash once to indicate that it has been programmed correctly. Wait 5 seconds and press the “unlock” once again to confirm the programmingRemove contact
- To program more than 1 remote control, it is necessary to do the same steps carried out before, indicating, by pressing the unlock button at intervals of 1 second, 2 times to indicate the second memory position, 3 times to the third memory position, 4 times for the fourth memory position.
- The turn signals flash once each time the “unlock” button is pressed. to indicate that the signal has been received.
- Wait 5 seconds
- Press the “unlock” once to confirm programming.
- The vehicle is unlocked and programming mode is deactivated once the key is removed from the ignition.
- Always turn off the ignition between key programming procedures.
If the programming does not work, it is necessary to delete it.
ERASE
< p>- From the contact.
- Manually lock the driver's door with the key.
- Press the unlock button 5 times at 1 second intervals.
- The turn signals flash once to indicate that the signal has been received. Wait 6 seconds.
- Press the unlock button once to confirm deletion.
- Remove contact
- Reprogram them
Transponder:
- Zedfull: 48 CRYPTO MEGAMOS
- Tango: ID48 MEGAMOS
- Keydi: 48
- Handy: ID48
- VVDI: ID48
- Clonable: YES
