- 1998 - 2005 Ford Focus
- 2001 - 2007 Ford Mondeo
- 2000 - 2006 Ford Transit
- 2002 - 2006 Ford Connect
Key programming:
- virgin transponder
- Keys can be added.
- If they are deleted, it is necessary to program at least 2 keys.
- With the door closed and the seat belt on, insert the key into the ignition and turn it from OFF to ON 4 times within 20 seconds.
- Remove the key from the ignition.
- Press any button, on some models you will hear an acoustic signal indicating that you have opened the button. the programming mode correctly and another to indicate that the remote control was successfully programmed. On other occasions you only hear the when receiving and recording the signal from the new remote control.
- All commands that are not present will be deleted and existing commands must be added again following the previous step.
- Turn the ignition from ON to OFF and open and close the door to exit programming mode then check the controls.
Profile. Tibe FO21/F06
Transponder:
- Zedfull: DST 80 BIT / 60WR MODE 40
- Tango: TIRIS DST 80 / 40 BIT
- Keydi: DST40 / 4D60
- Handy: DST40 / 4D60
- VVDI: 4D DST 40 ID60
- Clonable: YES
